Automatic Fire Suppression System
Mining Machine Automatic Fire Suppression Systems ( Temeperature Sensor / Solenoid Valve )
Detection Tube Model/Pneumatic Valve
Detection Cable Model/Solenoid Valve
Product Features:
Parameters:
| Mining Machine Fire Suppression Systems | |
|---|---|
|
Brand Name |
PRI-SAFETY |
|
Capacity |
6L, 9L, 12L, 18L,19L, 20L, 25L, 45L, 50L,65L, 100L, 106L |
|
Agent |
Foam / Dry Powder / FK-5112 |
|
Working Pressure |
14Bar |
|
Testing Pressure |
27Bar |
|
Cylinder Material |
Steel red painting Or Stainless Steel 304 |
|
Certificate |
UN ECE R107 , CE |
Note:
For Vehicle Engine Room, we can choose different fire agents, such as Water, AFFF3% Foam, FK-51112, or Dry Powder agents. The different systems are with different discharge tube and nozzles.
Product Activated Principle. (Pneumatic Valve)
Detection Tube Model/Pneumatic Valve
Inside the Pneumatic valve there is a piston, it divide the valve cavity to 2 parts. The upper cavity connect to detection tube, the lower cavity connect to bottle. The pressure of the 2 side of the piston is same. During the fire, Once the detection tube detected fire and ruptured one hole to release the pressure. Then the pressure of 2 side of the piston happen different, the piston was moved to up, and the outlet port of the valve was opened, and agent was discharged from the pipe and nozzles. At the same time, the pressure switch send final to fire alarm, the fire alarm was activated. On the control panel, there is a manual button and test button, reset button. In emergency Pushing the manual button can activate the fire system too.
Detection Tube Model/Pneumatic Valve
Detection Tube Model/Pneumatic Valve-----Single Bottle
Detection Tube Model/Pneumatic Valve-----2~4 Bottles
Product Activated Principle. (Solenoid Valve)
Temperature Detection Cable Type & Solenoid Valve
The detection cable to control panel, the control panel, once temperature reach 138°C, the detection cable send signal to control panel, and control panel will send signal to solenoid valve to open it, and activate the fire alarm. Then the fire agent was discharged from discharge tube and nozzles. On the control panel, there is a manual button and test button, reset button, in Emergency pushing the manual button can activate the fire system too.
- Activation Temperature: 138℃
- Power Required: 24V DC
- Agent: AFF FOAM, Powder, FK-5112, Coldfire, F500, etc.
- Discharge hose:
Flexible Rubber Hose or Stainless Steel Pipe, Both Optional
Temperature Detection Cable Type & Solenoid Valve
Temperature Detection Cable Type & Solenoid Valve---Single Bottle
Temperature Detection Cable Type & Solenoid Valve---2~4 Bottles
